Venturi Ozone Injector

This venturi is meant for injecting ozone into a stream of water. Flow must be sufficient and without major restriction downstream of the venturi, for proper function.

Both ends are sized to be a snug slip fit into a 3/4" PVC fitting, and the injection port is 1/8"-NPT threads. Included is a stainless steel barb fitting for 3/16" ID ozone tubing. 

It is very important that the barb fitting only be hand tightened gently (no wrench or pliers). Over-tightening will crack the venturi, due to the large force multiplier of tapered threads. 

*** IMPORTANT *** This venturi is meant for use in a submerged / internal application. It is not designed to and cannot be used externally.